If you don't know your ring size you can measure it yourself and check your size against the chart below. 

Firstly you need to choose the finger you want to wear the ring on. Cut a strip of paper cut to approximately 5mm thick, then wrap it snugly around your finger. Don’t worry – the correct ring size is determined based on a tight measurement, the ring itself won’t fit that tight! Make sure the paper strip is evenly overlapped and mark where the strip meets itself. Measure this length with a ruler to get your finger circumference in millimeters. 

49		J
50		K
51		L
52.5		M
54		N
55		O
57		P
58		P1/2 - Q1/2
59		R
60		R1/2 - S
62		T1/2

Our rings are stocked in three standard sizes K (small) M (medium) and O (large), highlighted above in pink. If none of these sizes fit, you can either switch and wear the ring on a different finger, or get in touch and we can get one made up in your size. Please note this will cost a £10 surcharge because it will be bespoke and not from a mould, and therefore take up to 7 working days to be shipped.